English Japanese to Top page
Products
blunk
Automatic Calibration

Scanner
TYPE 3116M
Automate 792A
TYPE 2011A
TYPE APSU792A

Transformer

Inductive Voltage Divider
TYPE 6430A
TYPE 6435A

TYPE 6415A
TYPE 6425A

TYPE 6401A
Error Compensation
Current Transformer

TYPE 6460A
TYPE 6461A
TYPE 6462A

LCR Standard
TYPE 6100A
TYPE 6100B

TYPE 6230A
TYPE 6233B

HCS Series
HLS Series
Capacitance Bridge
1210A

Decade Transformer(Inductive Voltage Divider)
TYPE 6415A / 6425A


(TYPE6425A)
1.Characteristics
1.1 Wide available application having sufficient characteristic as a ratio standard.
1.2 High input impedance, low output impedance.
1.3 Wide frequencies and low ratio error.
1.4 Remotely controllable via standard IEEE-488 interface.
1.5 Long term stability over wide range of environmental conditions due to simple structure and minimum variable factors.
2.Specifications
Description/Model 6415A
(High Accuracy Type)
6425A
(High Voltage Type)
Digit Decimal , 7dials Decimal , 6dials
Resolution 0.1ppm 1ppm
Frequency Range 50Hz to 10kHz 40Hz to 1kHz
Ratio Accuracy 0.5ppm(at 1kHz, referred to input) 1ppm(at 60Hz, referred to input)
Maximum Input Voltage*1 0.35V rms/Hz 5.0V rms/Hz
Input Impedance Above 100kΩ(at 1kHz) Above 50kΩ(at 60kHz)
Output Impedance Below 5Ω Below 20Ω
Output Current 1A max 1A max
Dimensions(W/H/D) 450 / 130 / 400 (mm) 450 / 130 / 400 (mm)

*1 Voltage 350 V rms MAX

  • SunJEM accepts to produce other products with customer's specification.
  • Specifications are subject to change without notice.

E-mail english@sunjem.co.jp