English Japanese to Top page
Products
blunk
Automatic Calibration

Scanner
TYPE 3116M
Automate 792A
TYPE 2011A
TYPE APSU792A

Transformer

Inductive Voltage Divider
TYPE 6430A
TYPE 6435A

TYPE 6415A
TYPE 6425A

TYPE 6401A
Error Compensation
Current Transformer

TYPE 6460A
TYPE 6461A
TYPE 6462A

LCR Standard
TYPE 6100A
TYPE 6100B

TYPE 6230A
TYPE 6233B

HCS Series
HLS Series
Capacitance Bridge
1210A
Error Compensation Current Transformer
(Standard Current Transformer)
TYPE 6460A
Model 6460A can output secondary current against primary current(5A) ratio error 10ppm and phase angle error 10µrad in accuracy where setting range is within 0-120%. It is convenient to expand the area of current value in every calibration works. Also, using it with Model 6462A as a set, you can create more expanded current range.
1.Characteristics
1.1 High accurate secondary current can be gained against setting value due to two-step structured transformer with compensating coil.
1.2 Secondary current can be output in one percent resolution accuracy in the area 0-120%.
1.3 Remotely controllable via standard IEEE-488 interface.
1.4 Model 6460A is durable for long term use because it is contained in aluminum-alloyed system case and transformer is molded.
2.Specifications
2.1 Primary Current 5A(Maximum10A)
2.2 Secondary Current Within 0 - 120% against primary current(Resolution 1%)
2.3 Frequency 50Hz to 400Hz
2.4 Ratio Error 10ppm
2.5 Phase Angle Error 10µrad
2.6 Rated Burden 25VA
2.7 GPIB Interface Equipped as standard
2.8 Power Supply 100V ac (50Hz to 60Hz)
2.9 Dimensions(W/H/D) 450 / 130 / 430 (mm)
2.10 Weight About15Kg
  • Model 6460A was developed under the technical guidance of JEMIC(Japan Electric Meters Inspection Corporation). Production and sales of this model is performed in accordance with a contract with them.
  • SunJEM accepts to produce other products with customer's specification.
  • Specification are subject to change without notice.

E-mail english@sunjem.co.jp